The cart is empty
Log in Register


Call for Price

DownloadsProduct Brief

The Astek A3803-PMC-55 brings SAS functionality to SPARC Compact PCI (cPCI) and VME blades, allowing legacy SPARC and 5V-only (non PCI-X) blades to use modern SAS and SATA disk media. To simplify system builder's inventory control, the A3803-PMC-55 can operate in both 5V only environments (at PCI-66/64), and full rate 133Mhz/64-bit in PCI-X environments. The serial interface allows point-to-point connection offering higher performance, increased aggregate bandwidth, high availability with dual ported SAS drives, and enhanced reliability compared to parallel SCSI.  The A3803-PMC-55 supports 3 Gbps SAS, 1.5 Gbps SAS, 3 Gbps SATA and 1.5Gbps SATA hard disk drives. External SAS expanders allow the A3803-PMC card to support up to 120 target disks.

Host Bus Type 64-bit/133MHz PCI-X, backward compatible to PCI 2.1 (5V tolerant)
Compliance PCI 2.2, PCI-X 1.0a, PCI-X 2.0 mode 1, IEEE 1386.1, VITA-39
Data Transfer

132MB/s (PCI 32-bit bus @33MHz)

264MB/s (PCI 64-bit bus@33MHz)

528MB/s (PCI 64-bit bus @66MHz)

800MB/s (PCI-X 64-bit bus @100MHz)

1056MB/s (PCI-X 64-bit bus @133MHz)

Modes Bus master DMA
PCI Voltage +3.3V +/- 5% (5V tolerant, universal PMC voltage keying)
PCI Power 7.5 Watts excluding transceivers
SAS Bus Eight 3Gbps SAS/SATA ports
SAS Bandwidths Single lane – 300 MBps
Wide Port (2 lanes) – 600 MBps
Wide Port (4 lanes) – 1200 MBps
Single SAS Lane – 600 MBps
Wide Port (2 lanes) –1200 MBps
Wide Port (4 lanes) – 2400 MBps
Connectors External Internal
A3803-PMC-55 Two- x4 SFF-8470 none
Form Factor 5.87” x 2.91”, 150 mm x 75 mm PMC Mezzanine Card
Protocols SCSI
Device Support Thousands of SAS WWIDs, more than 120 target disks with SAS fan-out expanders
Agency Approval CE, Canada, FCC class A, UL Registered
Environments Operating Storage
Temperature 0° to 55° C -40° to +85° C
Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing