719.260.1625  
The cart is empty
Log in Register

Astek Drive Sanitizer (A43212-SAN-01)

drive_erasure_front_20190919
drive_erasure_front_20190919drive_erasure_side_20190919drive_erasure_back_20190919full_unit_top_view_half_open_20180919drive_erasure_inside_drawer_top_20180919drive_erasure_inside_compartment_top_20180919
Call for Price

The Astek A43212-SAN  drive sanitizer provides fast secure block level sanitization for data centers.  The Astek sanitizer enables loose drives or drives mounted in almost any carrier to connect directly to the system. Drives are safely stored in one of four trays capable of supporting up to 8 hard drives each with speeds up to 1GBs per drive. Supported drives include SAS/SATA, HDD/SSD, and 2.5”/3.5” form factors. The Astek sanitizer greatly simplifies the data center sanitization process with it’s drive carrier agnostic interface in a standard 4U form factor housing up to 32 drives. 

 

Storage Protocol SAS/SATA
Supported Drive Sizes 2.5” / 3.5”
Supported Drive Types HDD / SSD
Drive Carrier Supports any carrier or loose drives
Controller 12 GB/s
Max transfer rate per drive 1 GB/s
Physical Dimensions 36” x 17.35” x 7”
Operating Voltage +12V +/-8%
PCI Power (Nominal) 22W
Environmental

Operating: 0oC to 40oC

Storage: -45°C to 105°C

5 to 90% Non-condensing

Regulatory Certifications Designed to be compliant to Safety standards UL-60950-1, CSA-60950-1, and IEC-60950-1. Designed to be compliant to Emissions standards EN-55022:2010/CISPR 22:2010, FCC Part 15 Subpart B Class A, ICES-003 and Immunity standard EN 55024:2010/CISPR 24:2010.
Warranty Limited 1 year warranty or 200 cycles
Astek Ordering Part Number A43212-SAN-01

Copyright 2017 by Astek Corporation.

Contact Astek Support:

Contact us via email Here

Phone: (719) 260-1625