Astek's A3803-PMC is the first 8 channel SAS adapter in the PMC form factor.
 - 3Gbps per port x 8 ports
- Supports 100+ disks using SAS expanders
- Support SAS and SATA/SATAII drives
- 64-bit, 133MHz PCIX
- On-board Hardware RAID (0,1,1e)
- Windows/Linux/RTOS Support
The Astek A3803-PMC doubles the performance of dual channel Ultra320 SCSI HBAs with aggregate I/O port bandwidth of 2.4GBytes/s and full duplex capability. These adapters are ideal for data centers and leverage the existing SCSI software infrastructure for investment protection and ease of migration. The serial interface allows point-to-point connections offering higher performance, increased aggregate bandwidth, higher availability with dual ported drives, and enhanced reliability compared to parallel SCSI. The A3803-PMC supports 3Gbps and 1.5 Gbps SAS and SATA hard disk drives. With the use of SAS Expanders a single A3803-PMC card can connect to hundreds of target disks and mutliple TerraBytes of storage capacity. Host Bus Type - 64-bit/133MHz PCI-X, backward compatible to PCI
Compliance - PCI 2.2, PCI-X 1.0a, PCI-X 2.0 mode 1, IEEE 1386.1, VITA-39
Data Transfer - 132MB/s (PCI 32-bit bus @33MHz)
- 264MB/s (PCI 64-bit bus@33MHz)
- 528MB/s (PCI 64-bit bus @66MHz)
- 800MB/s (PCI-X 64-bit bus @100MHz)
- 1056MB/s (PCI-X 64-bit bus @133MHz)
Required PMC Voltage - +3.3V +/- 5%
- NOTE: This card does not operate in 5V only configurations such as the Sun SPARC Netra family.
PCI Power - Quiescent: 7.5 Watts excluding transceivers
- Active/Maximum: 9 Watts
SAS Bus Eight 3Gbps SAS/SATA ports SAS Bandwidths Single lane – 300 MBps Wide Port (2 lanes) – 600 MBps Wide Port (4 lanes) – 1200 MBps Single SAS Lane – 600 MBps Wide Port (2 lanes) –1200 MBps Wide Port (4 lanes) – 2400 MBps Connectors Front Panel Internal A3803-PMC-(01/05/51) Two- x4 SFF-8470 connector none A3803-PMC-01 none x8 Lanes Rear Transition I/O to P4 A3803-PMC-02 Form Factor 5.87” x 2.91”, 150 mm x 75 mm PMC Mezzanine Card Protocols SCSI, IP Device Support Up to 252 SAS addresses Agency Approval CE, FCC class A, UL Recognized Environments Operating Storage Temperature 0° to 55° C -40° to +85° C Relative Humidity 5 to 90% non-condensing 5 to 90% non-condensing Supported Operating Systems - Windows 2000, Server 2003 32-bit and 64-bit (x86 and AMD64), XP
- RedHat Linux RHEL 3
- SuSE Linux 9
- Novel NetWare 5.1, 6.5
- Sun Sparc Solaris 2.6, 2.7, 2.8, 2.9, 2.10
- VxWorks 5.5.x, 6.x
- LynxOS 4.x
Part Ordering Information - A3803-PMC-05 Two-x4 SFF-8470 Front Panel RoHS Compliant
- A3803-PMC-55 5V Tolerant, Extended Temperature Range Operation [SPECIAL ORDER]
The Astek A3803 PMC card is compatible with drivers for the LSISAS3442-X PCI Add In Card. See the LSI website .
Copyright 2006 by Astek Corporation. All right reserved. Astek logo design is a registered trademark of Astek Corporation. Windows is a registerd trademark of Microsoft Corporation. VxWorks is a registered trademark of WindRiver Corporation. All other brands and products names may be trademarks of their respective companies. |